ERHARD 52987 Wheelaway Ball Rack

Chromed tubular steel construction. Supplied with 4 casters. Holds up to 12 balls. Dimensions:  ( l x w x h ): approx. 101 x 23 x 100cm. Easy to assemble.

Solid steel construction, powder-coated, adjustable rails to fit different ball diameters. Comes dismantled, easy to assemble. Dimensions: L x W x H approx. 155 x 40 x 140cm. With 4 rubber foot pads.

ERHARD Weight Rack 82667 For short, compact dumbbells

Modern rectangular tube construction.

Dimensions ( l x w x h ): approx. 129 x 50 x 91cm. 2 shelves. Weighs approx. 30kg.

Shelf width: 9cm (top) and 12cm (lower shelves).

ERHARD 82668 Weight Rack for Solid Dumbbells

Modern, rigid steel tube construction with two shelves, internal shelf width 9 cm. Dimensions       ( l x w x h ): approx. 129 x 50 x 91cm. Weighs approx. 30kg.

MARKWORT KE DLX210 DELUXE EQUIPMENT TRANSPORT

Extra large capacity, strong and secure, all steel welded construction. 1" steel tubing frame with a hinged top for pad locking, virtually "Theft Proof". Rubber casters help protect gym floor, easy mobility. Dimensions: approx. 145"(L) x 23"(W) x 34"(H). USA

ERHARD 52988 Ball Carrier

Chromed tubular steel construction with hinged lid (can be locked with a padlock) and casters. Ideal for storing and transporting balls. Dimensions ( l x w x h ): approx. 100 x 62 x 100cm. Storage space ( l x w x h ): approx. 92 x 62 x 87cm ( folded flat l x w: approx. (150 x 10cm ). Easy to assemble. Supplied without padlock.

ERHARD 52990 Ball Carrier STANDARD

Solid, powder-coated, tubular steel construction. Hinged lid with bracket to allow padlocking. Non-marking casters for easy maneouvring. Capacity: approx. 20 basketball up to 80 mini balls (according to size). Ideal for balls and small items.

Dimensions ( l x w x h ): approx. 70 x 70 x 70 cm

Weight approx. 28 kg when empty.

Supplied without padlock.

Ball Carrier

Fine mesh steel wire construction, galvanized and chrome plated. Hinged lid can be locked with a padlock. 4 casters. (diameter 100 mm) for easy maneouvring. The ideal and inexpensive carrier for balls and small pieces of equipment. Capacity 250 kg. Without padlock.

Ball Carrier MINI size ( l x w x h ): 90 x 70 x 75 cm Storage height: 60 cm

52986	52985	52989
without lid	lid only	complete with lid

Ball Carrier MAXI size( l x w x h ):100 x 75 x 100 cm  Storage height: 80 cm

52995	52996	52994
without lid	lid only	complete with lid

ERHARD 52991 Wheelaway Ball Rack

Fine-mesh, galvanized steel frame construction with pressed steel grid, mesh width 50mm. Execution with 2 folding doors which can be closed, bolt (without padlock) and top rail. Suitable for all standard balls and accessories. Height-adjustable grid-shelves for optimum ventilation with higher edges. 4 smoothly running casters diameter 100mm. Dimensions: approx. 150 x 140 x 62cm.

ERHARD Aluminium Trolley

With sliding doors, lockable. Fitted with aluminium grid shelves for water drainage and non-marking easy-running casters. Excellent for swimming pools. Dimensions (w x d x h ): approx. 150 x 150 x 65 cm.

86175 dismantled, for self-assembly

87176 fully welded

ERHARD 86174 Equipment Trolley

Aluminium, fully welded, with 4 easy-running plastic casters. The sliding doors can be locked by a cylinder lock (including 2 keys).  Specially designed for easy storing of balls, gym clubs, small equipment, gym hoops, jumping ropes and gym sticks up to a length of 100 cm length, balls etc.

Dimensions (w x d x h ): approx. 150 x 50 x 160 cm (including casters).

Size: 3.5’(w) x 2’(d) x 3’(h)

Size: 3.5’(w) x 2’(d) x 3’(h)

3 shelves, clearance 55/70cm, top shelf features two 15cm high side elements with 30 hooks underneath. Wheelable by means of stainless steel/nylon casters without brakes. Size ( l x w x h ): 138 x 60 x 172cm.

Made of firm plastic features simple transport of various water sport equipment. Open wrought baskets provide a fast water drain .

dimensions ( L x W x H ):

 86190  60 x 40 x 42 cm

 86191  60 x 40 x 74 cm

 86192  60 x 40 x 106 cm

Ideal for storing and transporting small equipment. Foldable for space-saving storae, high-quality hygienic plastic, assorted bright colours.

Outer dimensions ( L x W x H ): approx. 48 x 25 x 23/6cm

Ideal for transporting and storing gymnastic mats. Very sturdy steel tube construction, powder-coated, grey with wooden base, 2 steering and 2 fixed casters ( 160 mm diameter ) with non-marking profile. Size 100 x 200cm

For soft mats and landing mats. Powder-coated tubular steel construction. Low platform for easy loading and transport through doors with a minimum height of 210cm and a minimum width of 110cm. Maximum loading width per side: 46cm.

Horizontal Trolley for Gymnastic Mat in size: 1523 x 1219 x 32 mm

(Extra charge for wooden board)

ABC MAT TROLLEY

A.      Vertical Trolley for 2 pieces mat in size: 2440 x 1830 x 200 mm

B.       Vertical Trolley for 4 pieces mat in size: 2440 x 1830 x 200 mm

Horizontal trolley for gymnastic mat in size: 1523 x 1219 x 32mm

With perforated sheet metal doors ( grille )

Standard frame colour: light grey.

Sliding doors with safety safety lock. 4 adjustable shelves. High-quality storing varnish. Outer dimensions: 195cm high, 190cm wide, 60cm deep.

With solid sheet metal sliding doors

Sliding doors with safety lock. Left half: lockable compartment for valuables, hanger for clubs, rack for hoop etc. Right half: 5 adjustable shelves, high quality stoving varnish. Outer dimensions: 195cm high, 190cm wide, 60cm deep.

With solid sheet metal sliding doors.

With 2 solid sheet metal doors and 5 adjustable shelves with higher front rim. No perforations in back side. Including 3-bolt cylinder lock with folding handle and centre door reinforcement. Outer dimensions: 195cm high, 93cm wide, 50cm deep.

ABC Pinewood Cupboard with lock

Size (d x w x h): 30 x 53 x 78 inches

ERHARD 12790 Gymnastic Bench

24cm wide, 30cm high, made from selected multi-laminated pinewood, 10cm wide laminated balance beam. Top quality bench. Attachment ledge on one end of the bench. Legs with non-slip plastic protectors.

Length: 335cm

Height: 12 inches or 14 inches

Thickness of pinewood: 38 mm

Material import from Europe

ABC Fiberglass bench for school

Length: 335cm

Height: 12 inches or 14 inches

Color available: yellow, orange, light blue, sky blue, green & white.

For Wet Rooms with Aluminium Beams

This modular bench can be easily dismantled and extended. Stable 25 x 25mm stainless steel construction. The bases are height-adjustable. Very comfortable bench which consists of three 100 x 25mm powder coated hollow aluminium beams ( RAL 7035 ). The backrest and coat rail are also made of 100 x 25mm hollow aluminium rails, powder-coated in RAL 7035 ( light grey ). All ends have caps. The benches are resistant to the growth of fungi and bacteria and  can be cleaned with a sponge and detergents.

Several benches can be screwed together. 

Supplementary parts such as hat shelves and ground fixtures are available on request.

Double locker room bench, 2000 x 695 x 1650mm, seat height: 450mm with shoe rack

Construction:

• All locker room benches shown on this page available in standard length 2m only

• Sturdy 30 x 30mm square steel tubing

• Platinum grey powder-coated ( similar to RAL 7036 )

• Base with PVC height adjuster pads

• Seat planks, backrests and coat rails made from solid, knotfree wood'

• Coat rails are supplied with special plastic coat hooks.

Bench on one side only, with backrest and coat rail, consists of 7 single elements, screws included with shoe rack.

Construction:

• All locker room benches shown on this page available in standard length 2m only
• Sturdy 30 x 30mm square steel tubing
• Platinum grey powder-coated ( similar to RAL 7036 )
• Base with PVC height adjuster pads
• Seat planks, backrests and coat rails made from solid, knotfree wood'
• Coat rails are supplied with special plastic coat hooks.

Bench on both sides, with backrest and coat rails, consists of 11 single elements, screws included with shoe rack.

The wall-mounted benches are ideal if the benches have to be mounted above radiators. Easy to  assemble by putting it into the Z profile rail. Supplied without coat rail.

The footboards have a non-skid surface for safety. Supporting framework understructures are fabricated from 3-16" x 1-1/2" steel angles, fully welded and hot-dipped galvanized for maximum weather protection. Supporting frames are provided with cross bracing to provide maximum stability. Mounting holes are provided in the base of support frames for permanent installations.

Heavy-duty three row seating is designed with 12" wide anodized aluminum seats. The footboards have a non-skid surface for safety. Supporting framework understructures are fabricated from three 16" x 1-1/2" steel angles, fully welded and hot-dipped galvanized for maximum protection. Supporting frames are provided with cross bracing to provide maximum stability. Heavy-duty non-marking 4" diameter swivel casters allow for quick transitions to and from indoor storage areas.

Suitable for Indoor and Outdoor use.

Galvanized steel construction, seat benches and walkways are made from bonded, multi-laminated natural beech wood with double varnish, including sloped edges with colorless finish. Diameter 100mm polyamide wheels. Comes dismantled, one set per box, for self-assembly.

One complete set of stands consists of 5 stand blocks of different lengths ( one of which is a staircase ) as well as a plug-in backrest and 2 plug-in side parts. All necessary attachments and assembly instructions are included.

Application:

This compressor is a continuously running constant air flow type unit for use with bleeder type spray guns and accessories. A real handy-man's sprayer which is excellent for the shop and hobby works.

Features:

This sprayer combines quiet lubrication-free operation with rugged construction and operates from any 115 volt household circuit.

Specifications:

Air Displacement......1.3CFM

Type...... Oil-less Diaphragm

Bearings......Permanently Lubricated

Power Cord......6 ft., #18/3 AWG, UL Listed

Unit Shipping Weight......11 lbs.

Oil-free with lower rotational speed (approx. 1,700 revs./min.), ideal for inflating balls, mats etc. Aluminium casing with handle, hose (1.20m with two needles). Pump capacity: 70 litres/min., maximum pressure: approx. 3.5 bar, motor: 0.25kW, 230V/50Hz, weight: approx. 6 kg.

Single oil-free membrane compressor for sports, camping, caravaning and D.I.Y. Very robust and efficient. Plastic casing with handle,1.20m hose with lever switch and two ball needles (tapered needle, inflating needle). Without ball inflating pistol. Revolutions: 1,420 revs./min. Pump capacity: 200 litres/min. Max. pressure: approx. 8 bar. Motor: 0.75kW, 230V/50Hz, Weight: approx.9kg.

ERHARD 42601 Hand Blower

To inflate or deflate larger inflatable objects, 220V/335W. Very high performance, approx. 2.7 m³ / min.

ERHARD 42615 High-performance Blower

For bouncy mats and airbeds. High capacity, about 610 m³ at 80 cm/WS. Connection 220 V/500 W. Size (l x w x h): approx. 60 x 40 x 60cm. Weighs approx. 20 kg.

JOEREX JP016, Germany

8-INCH HAND-PUMP ( WHITE)

MATERIAL: RUBBER, PLASTIC, METAL

祖廸斯6吋白色手泵 (德國廠製造)

JOEREX JP023, Taiwan

HIGH-CLASS 10 INCH HAND PUMP

COLOUR: Red, Yellow, Blue, Green

MATERIAL: RUBBER, PLASTIC, METAL

祖廸斯高級10吋手泵 (台灣廠製造)

JOEREX 12322

JOEREX MULTI-FUNCTION FOOT PUMP

COLOUR: Gold, Silver, Blue, Purple

祖廸斯迷你多功能腳踏氣泵

JOEREX 21322

JOEREX HIGH PRESSURE FOOT PUMP

MATERIAL: PLASTIC, STEEL

祖廸斯腳踏高壓氣泵 (有單車夾)

JOEREX JP025

JOEREX HIGH-CLASS SCREW BALL NEEDLE (3 PCS)

MATERIAL: METAL

祖廸斯咭裝波針 (每咭三支)

ERHARD 53478 AIRMAN

Handy inflater for versatile use. Easily inflates balls, bike tyres, airbeds and even car tyres. Supplied with adapter, automatic pressure control and mains cable for recharging at the cigarette lighter as well as a power pack. Size:12 x 6 x 20cm. Air pressure: 10 bar. Pumping capacity approx. 30 min.

ERHARD 53441 Ball Pump DOUBLE ACTION

Strong double action pump that inflates when pushed and pulled. Practical, compact and lightweight. Made of solid acetal plastic, with plastic tapered needle.

53444 spare tapered needles (set of 3)

Consists of a ball pump with inflating needle, tools to pull out defective valves and push in the new valves, spare valves, instruction manual (in German).

not suitable for WV balls.

ERHARD 53446 Ball Pump

Hand pump, plastic, with flexible hose and inflating needle.

ERHARD 53445 Ball Pump Set

Immediate access design, 3 ball pumps with the 4 most common inflating needles in a sturdy wooden box with 3 small compartments for spare needles.

ERHARD 53471 Ball Inflating Pistol

For MK40 and MK110 with pressure gauge, 0-10 bar display. 1.20m hose. Hose connection fitting with 1/4" inside thread. Ball fitting with VG5.2 inside thread. Complete with 2 inflating needles.

53471 for MK 40

ERHARD 53452 Pressure Gauge

For tapered nozzles and needle valves. Display: 0 - 1.5 bar.

ERHARD 53450 Foot Pump

Volume approx. 5,000 cm³, for inflating and deflating.

ERHARD 53550 Nylon Needle

Very flexible, for hollow needle valves, suitable for hand pumps 53420 and 53430

For rubber bladder valves, suitable for hand pumps 53420 and 53430.

ERHARD 53550 Short Adapter Needle

With short nozzle, for PVC and WV balls, suitable for hand pumps 53420 and 53430.

Seals and repairs leaking bladders from the inside (1 tube = permanent sealing). Also suitable as preventive measure. Full guarantee.

● #56078 Line Marker Only

● #56079 Complete with 20 kg Marking Fluid